# Hologram Dash

**Type:** Product page · **SKU:** CE05454 · **Brand:** [Hologram](https://core-electronics.com.au/brands/hologram-australia)
**Page:** https://core-electronics.com.au/hologram-dash.html ([markdown](https://core-electronics.com.au/hologram-dash.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: CE05455.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/CE05455

## Description

A cellular connectivity board pre-certified for end use equipped with Hologram's networking firmware.

### ACCELERATE YOUR PRODUCT DEVELOPMENT

Create a new connected device in minutes rather than months with the Dash's out-of-the-box cellular connectivity, Arduino IDE compatibility, and available I/O interfaces.

### FOCUS ON YOUR CORE PRODUCT EXPERIENCE

Spend less time building out connectivity infrastructure and more time building your core product.

### STREAMLINE PRODUCT TESTING

Avoid longer testing and certification cycles by embedding our certified Dash hardware in your product.

### ZERO SETUP CELLULAR IOT GATEWAY

Send your data to the cloud with a single line of code, our Dash firmware takes care of the rest.

### ARDUINO IDE COMPATBILITY

Leverage Arduino development resources to accelerate your speed-to-market.

### FULLY PRE-CERTIFIED END DEVICE (FCC/PTCRB/GCF)

Rest assured that you're building a product on a platform that's been tested and pre-certified.

### OVER THE AIR UPDATES FOR YOUR CODE

Update your deployed products in the field with your own program and our latest firmware through the Dash's OTA feature.

### Technical specifications

- Cellular Module: Ublox Sara U201
- 2G: GPRS/EDGE, 3G: UMTS/HSPA
- U201 Global Quad-band 850/900/1800/1900 MHz
 
- u.FL Antenna Connector
- Nano SIM card holder
- Cortex M4 microcontroller (User Module)
- MK22FN1M0VLH12A 120MHz
- 1MB flash, 128KB RAM
 
- Cortex M0+ microcontroller (System Module)
- MKL17Z256VFM4 48MHz
- with 256KB flash, 32KB RAM
 
- 25 GPIO (I2C, SPI, UART, CAN, analog)
- Onboard battery management & charging
- JST battery connector
- USB Micro
- Debug LED
- Programming switch
- User/Sytem module reset switches
- 55mm x 20mm x 9mm / 2.2" x 0.8" x 0.6" Dimensions w/Components
- 55mm x 20mm x 16mm / 2.2" x 0.8" x 0.3" Dimensions of PCB
- 9.0g Weight

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/c/e/ce05454-1.jpg)