# HighPi Raspberry Pi 4 Model B Case

**Type:** Product page · **SKU:** CE06811 · **Brand:** [The Pi Hut](https://core-electronics.com.au/brands/the-pi-hut)
**Page:** https://core-electronics.com.au/highpi-raspberry-pi-4-model-b-case.html ([markdown](https://core-electronics.com.au/highpi-raspberry-pi-4-model-b-case.html.md))

Updated for the Raspberry Pi 4, the very popular HighPi case defines ease of use and versatility. Tall enough to host a wide range of add-on boards, and slim enough to look cool. Use it with a Pi 4 alone, or with popular add-ons like the PoE, Serial, UPS, or HiFiBerry audio HATs.

## Pricing

- **Price:** $21.65 (inc GST) — $19.68 AUD, exc GST
- **Quantity discounts:** 10+ $18.89 (exc GST) · 25+ $18.30 (exc GST)

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

Updated for the Raspberry Pi 4, the very popular HighPi case defines ease of use and versatility. Tall enough to host a wide range of add-on boards, and slim enough to look cool. Use it with a Pi 4 alone, or with popular add-ons like the PoE, Serial, UPS, or HiFiBerry audio HATs.

 **RAPID, TOOL-FREE ASSEMBLY**

The HighPi case sets the standard for ease of use and versatility in Raspberry Pi cases. Installing or removing the Raspberry Pi PI3B board is astonishingly quick, simple, and secure; all without tools or assembly. One snap action locks the Pi board into the case; the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius! Customers assembling large volumes of Pi boards in cases love how much time and effort this case saves them.

The HighPi case can be wall-mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case. When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables.

If you have a Raspberry Pi that's older than the Pi 4B [check out the other version of this case](https://core-electronics.com.au/highpi-raspberry-pi-b-2-3-case-black.html).

 **FITS ALL KINDS OF HATS**

Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. A two-section break-out allows you to choose how much of the A/V side of the case to open up for connectors on attached boards. Here are just a few examples of the HATs that fit perfectly in the HighPi.

- **RASPBERRY PI POE HAT:** The HighPi case holds the PoE HAT perfectly, fully securing both the Pi and HAT boards. Many competing cases cannot secure the Pi board to the case once a HAT is added to it. The side and bottom ventilation slots allow the fan to move air in and out of the case.
- **HIFIBERRY HATS:** This case perfectly accommodates the full line of HiFiBerry audio boards. Use one break-out section for DAC+ and Digi+, and both for the Amp+ or DAC+DSP. There is generous clearance around the RCA connectors for bulky, high-end cables.
- **SERIAL HAT:** Do you need to communicate via serial? Our serial HAT can be enclosed tidily along with the Pi board.
- **UPS HAT:** The UPS HAT and Pi board are both enclosed easily in the HighPi case, with significant space for larger batteries. The GPIO connector pins remain accessible, and a GPIO ribbon cable can be run out of the case while fully assembled.
 
 **HIGHPI CASE FEATURE LIST**

- High quality ABS plastic case, designed and made in Canada
- Industry-leading ease of use, rapid tool-free assembly and disassembly
- Large internal volume for HATs, break-out boards, or heat sinks
- Vents on three sides double as fly-through cable ports
- Two-section breakout on A/V side for HAT board I/O
- Large vent opposite A/V side allows GPIO ribbon cable pass-through
- Micro SD card access port
- Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts
- for easy removal, horizontal orientation with A/V side down, 40mm spacing
- Mounting option 2: four M3.5/M3/#6 screws through feet from inside for
- Secure mounting in any orientation, 68.3 x 38.8mm spacing
- Self-adhesive rubber feet included, set of 4
- Matte finish hides fingerprints
 
 **DIMENSIONS**

- External dimensions: 97 x 66 x 41mm
- Internal volume for breakout boards: 90 x 60 x 28.8mm

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/d/s/dsc01233__19715.1560804335__70706.1561145835_1000x.jpg)