# LPM-10C Multifunctional Network Cable Tracker

**Type:** Product page · **SKU:** CE11190 · **Brand:** [FNIRSI](https://core-electronics.com.au/brands/fnirsi)
**Page:** https://core-electronics.com.au/fnirsi-lpm-10c-multifunctional-network-cable-tracker.html ([markdown](https://core-electronics.com.au/fnirsi-lpm-10c-multifunctional-network-cable-tracker.html.md))

Trace, test and length-check network cabling from a 2.4-inch colour screen - with PoE detection, PING, IP scan and NCV, all in the same device.

## Pricing

- **Price:** $200.37 (inc GST) — $182.15 AUD, exc GST

## Availability & dispatch

- Available with a lead time — expect dispatch between Oct 05 and Oct 21.

## Description

Finding one cable in a ceiling full of identical blue jackets is usually a two-person job, with a lot of trial and error. A paired tone transmitter and colour-screen receiver turn it into a one-person walk-in-the-park, with anti-interference tracing that still works next to fluorescent tubes and mains runs.

It goes further than a tone-and-probe set. Cable length comes back to ±1.6 m under 20 m and ±3.2 m past 100 m, wiremap testing calls out opens, shorts and crossovers, and an RJ45 crimp test verifies pin-by-pin continuity before a bad termination becomes an intermittent fault six months later.

For live networks, there is PoE detection (end-span, mid-span or 8-pin; standard and non-standard, with supply mode and power level), a PING test, an IP scan for active devices, and port flashing to blink the matching port on a switch. NCV detection flags AC voltage without contact, and a built-in torch.

### Features

- Locates a single run through noisy environments, thanks to a switchable anti-interference tracing mode alongside the normal tone mode.
- Reads results at a glance on a 2.4-inch TFT colour screen with adjustable backlight, instead of decoding a row of LEDs.
- Measures cable length to ±1.6 m under 20 m, ±2.4 m from 20–100 m and ±3.2 m beyond 100 m — enough to tell which of two similar runs you're holding.
- Identifies wiring faults fast with pair-check, wiring-sequence and error indication, plus an RJ45 crimping test for verifying terminations.
- Diagnoses PoE automatically: end-span, mid-span or 8-pin power, standard or non-standard, with supply mode and power level reported.
- Confirms link quality with a 10/100/1000 Mbps speed test across full and half duplex, auto-negotiation or fixed mode.
- Flashes the corresponding switch port so you can identify it from the rack without unplugging anything.
- Checks for live AC without contact via NCV, and lights the workspace with a built-in flashlight.
- Works a full day on 1500 mAh (transmitter) and 3000 mAh (receiver) batteries, both charged over a single USB Type-C port (when connected together).
- Adjustable receiver sensitivity and headphone support let you narrow in on a run by ear when the display is out of sight.
 
### Specifications

 | Property | Specification |
|---|---|
| Display | 2.4" TFT colour screen, adjustable backlight |
| Cable tracing | Normal mode / anti-interference mode |
| Continuity testing | RJ45 interface; pair check, wiring sequence and fault detection, error indication |
| Cable length accuracy | &lt;20 m: ±1.6 m · 20–100 m: ±2.4 m · &gt;100 m: ±3.2 m |
| PoE testing | End-span / mid-span / 8-pin power; standard and non-standard PoE; automatic identification of supply mode and power level |
| Network speed test | 10 / 100 / 1000 Mbps, full or half duplex |
| Port flash | Full/half duplex, auto-negotiation or fixed mode (auto detection) |
| Network tools | PING test, IP scan |
| Receiver functions | Sensitivity adjustment, trace modes, wire sequence comparison, NCV detection, flashlight, low-voltage warning, headphone support |
| Battery | 1500 mAh (transmitter) · 3000 mAh (receiver) |
| Charging | USB Type-C, 5 V / 1 A |
| Languages | English / Chinese |
| Dimensions | 152 × 68 × 31 mm (approx.) |
| Operating environment | -5 to 40°C, ≤80% relative humidity |

### What's Included

- 1x LPM-10C host unit
- 1x USB Type-C cable
- 1x Alligator clip lead
- 1x Headphone cable
- 1x RJ45 to RJ11 cable
- 1x RJ45 cable
- 1x Storage bag

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/C/E/CE11190_ecommerce_1789967799386.jpg)
