EXTRUDER CONTROLLER(2 THERMOCOUPLE TYPE) (Seeed Studio)

SKU: SS102990141 Brand: Seeed Studio

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

This extruder controller card is a temperature monitoring and PID temperature controller for 3D printers. If you have a desktop CNC machine you can easily convert your CNC to a 3D printer with this controller card. You can also handle your temperature related tasks of your 3D printer with this card without the need of a computer. You can set both the extruder temperature and the heated bed temperature with on board trimpots. You can read digitally your setting temps and sensor values from the LCD. You can directly connect your heating elements to the board. High Power MOSFETS can handle your current requirements.

 

 

Features:


  • Standalone No PC Connection Required


  • Based on the Arduino Diecimila


  • 2×16 LCD


  • Simple Temp Settings With Onboard Pots


  • 2 High Power MOSFET Outputs (5A at 12V)


  • 2 Thermocouple Input (2x Max6675)


  • Needs 12VDC as power source


  • 2 PID Computation Via On-board Micro-controller

 

Connection Diagram:

 

 

Suitable Heating Element:

 

You can use the below resistor (6R8 Ohm RESISTOR 7W 5% ) as heating element with the above controller board.

 

 


  • Resistance: 6.8ohm


  • Resistance Tolerance: ± 5%


  • Power Rating: 6W


  • Voltage Rating: 350V


  • Temperature Coefficient: ± 75ppm/°C


  • Resistor Element Material: Wirewound


  • Resistor Terminals: Axial Leaded


  • Resistor Mounting: Through Hole


  • External Length / Height: 18mm External Width: 6.5mm


  • Operating Temperature Range: -55°C to +350°C


  • Package / Case: 6 x 22


  • Power Rating at 25°C: 7W

 

Suitable thermocouple Sensor

 

You can use K type  Thermocouple to measure temperature between 0°C to +350°C

K-type Thermocouple Sensor Probe

Operating Temperature: :-50~350℃

Cable length: approx. 100 cm

Interface length: approx. 12.5 mm

Net weight: approx. 45g

 

Any further questions, please contact the technical support.

 

Project Web Page

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...

PiicoDev Schematic System

Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.