# ESP32-P4 Dual-Band Wi-Fi 6 Dev Board Kit (Camera, Speaker & External Antenna)

**Type:** Product page · **SKU:** WS-35804 · **Brand:** [Waveshare](https://core-electronics.com.au/brands/waveshare-in-australia)
**Page:** https://core-electronics.com.au/esp32-p4-dual-band-wi-fi-6-dev-board-kit-camera-speaker-external-antenna.html ([markdown](https://core-electronics.com.au/esp32-p4-dual-band-wi-fi-6-dev-board-kit-camera-speaker-external-antenna.html.md))

Start building camera, voice and Wi-Fi 6 projects straight away - the camera, speaker and antenna are in the box.

## Pricing

- **Price:** $48.63 (inc GST) — $44.21 AUD, exc GST

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

A 400 MHz dual-core RISC-V development board for camera, display and audio projects, with dual-band Wi-Fi 6 and Bluetooth 5 (LE) from an onboard ESP32-C5 co-processor.

This kit pairs the board with a 5 MP Raspberry Pi Camera (B), a speaker, an external FPC Wi-Fi antenna and connecting cables, so camera and audio projects are ready to go. Add a display separately: Waveshare lists its 5, 7, 8 and 10.1 inch DSI touch screens as supported, including the [10.1" DSI Capacitive Touch Display (800×1280)](https://core-electronics.com.au/10-1inch-dsi-capacitive-touch-display.html).

Built around the ESP32-P4NRW32X with an integrated Image Signal Processor, H.264 encoder and Pixel Processing Accelerator, it suits computer vision and machine vision, smart-home and industrial control panels, and vending machine interfaces.

Getting started is simple:

- Plug in a USB Type-C cable for power, program flashing and serial debugging.
- Develop in ESP-IDF (Waveshare's recommendation), which provides a board support package and the Brookesia application.
- Or use Arduino-ESP32, with board definitions and peripheral examples for version 3.3.11. Waveshare notes that complex examples and display combinations need individual verification.
- Hold BOOT while powering on or resetting to enter download mode.

### Features

- Capture and encode Full HD video on-chip: 1080P @ 30 fps H.264 and JPEG encoding from the MIPI-CSI camera input
- Drive high-resolution touch displays smoothly, with a Pixel Processing Accelerator, 2D-DMA and 1080P @ 30 fps JPEG decoding behind the MIPI-DSI output
- Record and play back audio for voice projects using the onboard microphone, ES8311 codec and NS4150B amplifier, which drives the included speaker
- Position the external FPC antenna for the best reception via its U.FL connector
- Run large, graphics-heavy applications with 32 MB of in-package PSRAM and 32 MB of onboard NOR flash
- Connect USB peripherals or act as a USB device through the USB 2.0 High-Speed OTG port; an MX1.25 4-pin to USB adapter cable is included
- Log data and store media on a TF (microSD) card over fast 4-bit SDIO 3.0
- Expand freely with 27 programmable GPIOs on pre-soldered 2×20 pin headers
- Protect firmware and data with Secure Boot, Flash Encryption, cryptographic accelerators, TRNG, a Digital Signature Peripheral and a dedicated Key Management Unit

### Specifications

| Property | Specification |
|---|---|
| Microcontroller | ESP32-P4NRW32X |
| HP processor | RISC-V 32-bit dual-core, up to 400 MHz, with DSP and instruction set extensions and FPU |
| LP processor | RISC-V 32-bit single-core, up to 40 MHz |
| Memory | 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB HP SPM |
| PSRAM / Flash | 32 MB in-package PSRAM / 32 MB NOR flash |
| Wireless co-processor | ESP32-C5 module (SDIO), U.FL external antenna |
| Wi-Fi | Dual-band 2.4 / 5 GHz Wi-Fi 6 (802.11ax) |
| Bluetooth | Bluetooth 5 (LE) |
| Camera interface | MIPI-CSI 2-lane with integrated ISP |
| Display interface | MIPI-DSI 2-lane |
| Audio | Onboard microphone, ES8311 codec, NS4150B amplifier, MX1.25 2-pin speaker header (8 Ω 2 W) |
| USB | USB Type-C (power, flashing, serial debugging via CH343P); USB 2.0 HS OTG on MX1.25 4-pin header |
| Storage | TF (microSD) card slot, SDIO 3.0 (SDMMC 4-bit) |
| GPIO | 2×20 pin headers, 27 programmable GPIOs |
| Peripherals | SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI |
| Shared I2C bus | SDA GPIO7 / SCL GPIO8, shared with codec, camera and display touch/backlight; check for address conflicts |
| Buttons / indicators | BOOT, RESET, power LED |
| Board width | 21 mm |
| Development | ESP-IDF (recommended), Arduino-ESP32 3.3.11 |
| Included camera | Raspberry Pi Camera (B): OV5647, 5 MP, 1/4", F2.0, 6 mm focal length, 60.6° FOV, manual focus, no night vision |

### Resources

- [Waveshare ESP32-P4-WIFI6-DB Wiki](https://docs.waveshare.com/ESP32-P4-WIFI6-DB)

### What's Included

- 1x ESP32-P4-WIFI6-DB-UM development board (pin headers pre-soldered)
- 1x Raspberry Pi Camera (B)
- 1x FPC dual-band Wi-Fi antenna
- 1x 15-pin FFC cable
- 1x Raspberry Pi Zero camera cable (approx. 15 cm)
- 1x 8 Ω 2 W speaker
- 1x MX1.25 4-pin to USB adapter cable

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/W/S/WS-35804_ecommerce_1793165128257.jpg)