DFRobot BLE4.1 Module

SKU: TEL0120 Brand: DFRobot

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

Introduction

BLE4.1 Module is DFRobot newly developed Bluetooth 4.1 transmission module, adhering to the same usage of Bluno, and increasing the star network function, KISS connection (Approach Connection). The new Bluetooth is designed based on BLE 4.1 technology. It has low power consumption and other special features. In the BLE transmission, the point-to-point output rate is 4Kbps, equivalent to the original Bluno twice the rate.


BLE4.1 Module uses DA14681 high-performance BLE chip, it integrates advanced power management system, coming with 3.7V lithium battery charging circuit. It obtains power directly from the USB port. Support 400mA maximum charge current,

BLE 4.1 Bluetooth P2P Connection

BLE 4.1 Bluetooth Star Network Connection

FEATURES

  • Support BLE 4.1 master and slave switch
  • Support Bluetooth serial data transmission
  • Support Bluetooth point-to-point wireless programming
  • Support Bluetooth 4.1 multi-device cascade (up to 4)
  • Support Arduino Bluetooth library (support for multi-Bluetooth connection)
  • Support low power consumption Bluetooth (standby 25uA; interrupt 70uA)
  • Two-way interrupt wake up:
  • BLE4.1 wake up controller via P4_2 (high level wake up)
  • The controller wakes up BLE4.1 via WAKEUP (low level wake)
  • Support KISS connection method (Approach Connection)
  • Support Bluetooth firmware update
  • Support lithium battery powered
  • Support USB to charge the lithium battery
  • LED status indicator
  • Specification

  • Processor: DA14681 (ARM Cortex-M0 CPU)
  • Operating Voltage: 3.3V
  • USB input Voltage: 4.2V ~ 5.0V
  • Lithium battery powered: 3.7V
  • Support USB charging (chip comes with charging function)
  • Charging current: 10mA ~ 400mA (max)
  • Allow external lithium battery capacity: 20mAh ~ 500mAh (max)
  • Supports low power consumption: only 30uA / MHz minimum 2uA
  • Single I / O port maximum output current: 4.5mA
  • Allows I / O port maximum output total current: 100mA
  • Supports three network connection modes (P2P connection, star network, tree network [Developing])
  • Maximum number of slave connections: 4 (simultaneous connection)
  • Maximum transfer rate of 4Kbps
  • Flash: 8Mbit
  • 64KB OTP
  • 128KB Data SRAM
  • 16KB Cache SRAM
  • 128KB ROM
  • On-chip crystal: 16MHz, 32.768KHz
  • Three power management modes: Extended sleep, Deep sleep, Hibernation
  • 29 digital I / O ports
  • 8 analog inputs
  • 1 SPI
  • 2 I2C (supports 100KHz and 400KHz two communication rates)
  • 2 UARTs
  • 6 PWM
  • I2S / PCM master-slave interface
  • IR interface (PWM)
  • Support USB1.1 (computer-side simulation into a serial port)
  • Built-in temperature sensor
  • Transmit power consumption: 3.4mA (TX) 3.1mA (RX)
  • Operating temperature: -40 ℃ ~ +85 ℃
  • Dimension: 25 * 18 * 3 mm/ 0.98 * .70 * 0.11 inches
  • Documents

  • Product wiki
  • More Documents
  • Parts List

    DFRobot BLE4.1 Module V1.0 x1

    This product is listed in:

    Retired

    Product Comments

    Exact shipping can be calculated on the view cart page (no login required).

    Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

    We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

    • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
    • $6+ for Standard Post (typically 6+ business days, tracked)
    • $10+ for Express Post (typically 2+ business days, tracked)
    • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

    Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

    Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

    International Orders - the following rates are for New Zealand and will vary for other countries:

    • $11+ for Pack and Track (3+ days, tracked)
    • $16+ for Express International (2-5 days, tracked)

    If you order lots of gear, the postage amount will increase based on the weight of your order.

    Our physical address (here's a PDF which includes other key business details):

    Unit 18, 132 Garden Grove Parade
    Adamstown
    NSW, 2289
    Australia

    Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

    Have a product question? We're here to help!

    Write Your Own Review

    Guides

    The Maker Revolution

    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

    Projects

    Days2Bin: Pico Powered Bin Reminder

    Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
    Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

    Raspberry Pi Video Looper Display Installation | Overshare Video Festival

    IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
    IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

    Mailbox Delivery Notification System

    Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
    Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
    Feedback

    Please continue if you would like to leave feedback for any of these topics:

    • Website features/issues
    • Content errors/improvements
    • Missing products/categories
    • Product assignments to categories
    • Search results relevance

    For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

    Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

    Makers love reviews as much as you do, please follow this link to review the products you have purchased.