# DC Toy / Hobby Motor - 130 Size

**Type:** Product page · **SKU:** ADA711 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/dc-toy-hobby-motor-130-size.html ([markdown](https://core-electronics.com.au/dc-toy-hobby-motor-130-size.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: CE09245.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/CE09245

## Description

These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting. They'll fit in most electronics that already have 130-size motors installed and there's two breadboard-friendly wires soldered on already for fast prototyping
 
 Check the Technical Details tab for more detailed information!

## Technical Details

- Operating Temperature: -10°C ~ +60°C
- Rated Voltage: 6.0VDC
- Rated Load: 10 g\*cm
- No-load Current: 70 mA max
- No-load Speed: 9100 ±1800 rpm
- Loaded Current: 250 mA max
- Loaded Speed: 4500 ±1500 rpm
- Starting Torque: 20 g\*cm
- Starting Voltage: 2.0
- Stall Current: 500mA max
- Body Size: 27.5mm x 20mm x 15mm
- Shaft Size: 8mm x 2mm diameter
- Weight: 17.5 grams

## Guides for this product

- [How to use Stepper Motors and DC Motors with a Raspberry Pi - Adafruit DC & Stepper Motor HAT](https://core-electronics.com.au/guides/raspberry-pi/raspberry-pi-dc-stepper-motor-guide/)
- [Natural Disaster Sensor Project for Micro:bit](https://core-electronics.com.au/guides/micro-bit/natural-disaster-sensor-project-for-the-microbit-stem/)
- [Relay Operation and the Arduino Uno](https://core-electronics.com.au/guides/arduino/relay-operation-with-arduino/)
- [Potentiometers and the Arduino Uno](https://core-electronics.com.au/guides/arduino/potentiometers-and-the-arduino-uno/)

## Videos for this product

- [How to use Adafruit DC & Stepper Motor HAT - Controlling DC and Stepper Motors With A Raspberry Pi](https://core-electronics.com.au/videos/how-to-use-adafruit-dc-stepper-motor-hat-controlling-dc-and-stepper-motors-with-a-raspberry-pi-)
- [Micro:bit - Natural Disaster Project - DIY Wind Sensor](https://core-electronics.com.au/videos/microbit-natural-disaster-project-diy-wind-sensor)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/d/c/dc-toy-hobby-motor-130-size-1.jpg)