# Cytron Maker Nano

**Type:** Product page · **SKU:** CE11202 · **Brand:** [Core Electronics](https://core-electronics.com.au/brands/core-electronics-australia)
**Page:** https://core-electronics.com.au/cytron-maker-nano.html ([markdown](https://core-electronics.com.au/cytron-maker-nano.html.md))

An Arduino Nano-compatible ATmega328P board with 12 onboard GPIO indication LEDs, a programmable push button and a piezo buzzer to make learning and debugging easier.

## Pricing

- **Price:** $18.89 (inc GST) — $17.17 AUD, exc GST

## Availability & dispatch

- Available with a lead time — expect dispatch between Oct 07 and Oct 21.

## Description

The Maker Nano is an Arduino-compatible board that packs a handful of useful onboard peripherals into the Arduino Nano form factor. It keeps the same ATmega328P microcontroller and pin arrangement as the original Nano, and adds 12 LEDs, a programmable push button and a piezo buzzer, so you can start experimenting straight out of the bag without building a circuit first.

### Learn and troubleshoot faster

Each digital pin from D2 to D13 has its own LED, which shows you the pin's state at a glance. This is handy for your first sketches and just as useful later on when you're debugging a project. The onboard LEDs can be disabled with a jumper on the underside if you'd rather they stay off.

- 12 programmable LEDs on D2 to D13
- 1 programmable push button on D2
- 1 piezo buzzer on D8, with a mute switch
- Serial port (TX/RX) and power indicator LEDs
 
### Built for projects

The Maker Nano is only slightly bigger than an original Arduino Nano (about 1mm longer and 3mm wider) and keeps the same pinout, so it works with most Nano daughter boards and sits neatly on a breadboard. It also has a 5V regulator, so you can power it from a battery or DC adapter on VIN (7-30V) as well as from USB.

### Specifications

- Microcontroller: ATmega328P
- Programming: Arduino IDE
- Operating voltage: 5V
- VIN voltage: 7-30V
- Power supply: VIN or USB
- USB connector: Micro USB
- USB to serial chip: CH340C (driver may be required)
- Digital I/O pins: 20
- PWM pins: 6
- Analog inputs: 8 (10-bit)
- Interfaces: 1 x UART, 1 x SPI, 1 x I2C
- External interrupts: 2
- Flash memory: 32KB
- SRAM: 2KB
- EEPROM: 1KB
- Clock speed: 16MHz
- Dimensions: 45.8 x 21.1mm
 
### Package includes

- 1 x Maker Nano
 
USB cable not included.

![](https://core-electronics.com.au/media/wysiwyg/product-pages/maker-nano-pinout.jpg)

### Resources

- [Maker Nano Datasheet](https://docs.google.com/document/d/1lUUJSzbsvzH_Ss6vDcHpGfVY7p_txuW5BZ1QOmHgcBA/view)
- [Maker Nano Schematic v1.0.0](https://drive.google.com/file/d/1xRj-DJnCv_tZUSp1jUOuZCaw-S2rgI9P/view)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/C/E/CE11202_ecommerce_1790723638758.jpg)