Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

Rating:
100% of 100
SKU: FIT0349 Brand: DFRobot

This is a bipolar stepper motor with a planetary gearbox (gear ratio: 5.18) and uses a standard 8mm-diameter D type output shaft, with a 1.8° step angle (200 steps/revolution).

$68.50 AUD, inc GST
$62.27 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 2nd of Apr

Quantity Discounts:

  • 6-12 $60.40 (exc GST)
  • 12+ $59.16 (exc GST)
- +

1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.0 A at 3.4 V, allowing for a holding torque of 18kg-cm (176N-cm) (200rpm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the Dual Bipolar Stepper Motor Shield for Arduino (DRV8825).
 
Notice: please carefully confirm techical details (torque, dimension, mounting, etc) for your project(s) before purchasing.

 DIY Alarm using Home Assistant, Konnected, and Sonoff RF Bridge

Hardwares you needed:

TB6600 Stepper Motor Driver

Bipolar Stepper Motor Project 1: How to Make A Terrifying Halloween Gadget

This is a simple but fun application for Halloween. All you need is a mask, a stepper motor, a micro-controller, a motor driver, a MP3 module and some wires as well as batteries. 

Hardware components:

DFRduino UNO R3 - Arduino Compatible

TMC260 Stepper Motor Driver Shield For Arduino

Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

DFPlayer - A Mini MP3 Player For Arduino

Gravity: Digital PIR (Motion) Sensor For Arduino

APPLICATIONS

  • Printer
  • 3D Printer
  • CNC
  • Robotics
  • Linear Actuators

SPECIFICATION

  • Model No: 42BYGH40-18-22A-C5.18
  • Step Angle (degrees) :1.8
  • 2 Phase
  • Voltage: 3.4V
  • Current: 1.0A
  • Resistance: 1.7±10% Ohm/Phase
  • Inductance: 4.3±20% mH/Phase
  • Holding Torque: 3600 g.cm
  • Detent Torque: 400 g.cm
  • Insulation Class: B
  • Life: 6000 hours
  • Gear Ratio: 5.18:1
  • Hold Torque with Gearbox: 18kg·cm (176N·cm) (200rpm)
  • Dimension: 42×42×40mm(1.65x1.65x1.57")
  • Mounting: 4 x M3

DOCUMENTS

SHIPPING LIST

  • Stepper Motor with Planet Gear Box ×1

This product is listed in:

Components & Parts>Motors>Stepper Motors

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Servos, Steppers or Solenoids? | Choosing an Actuator to Move Your Project

In this guide, we go over some common ways of adding motion to your project with actuators such as ...
In this guide, we go over some common ways of adding motion to your project with actuators such as ...

How to use Stepper Motors and DC Motors with a Raspberry Pi - Adafruit DC & Stepper Motor HAT

This guide will demonstrate exactly how to control Standard Stepper Motors and DC Motors with a Ras...
This guide will demonstrate exactly how to control Standard Stepper Motors and DC Motors with a Ras...

How To Control A Motor with the Raspberry Pi

In this tutorial, we are going to connect a Motor to the Raspberry Pi and create a hypnotic self-spi...
In this tutorial, we are going to connect a Motor to the Raspberry Pi and create a hypnotic self-spi...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Roverling

Introduction My first 3D printer was a CTC generation 2 clone of MakerBot ‘The Replicator Du...
Introduction My first 3D printer was a CTC generation 2 clone of MakerBot ‘The Replicator Du...

DIY Pi Buggy

The motivation behind this project came from a robotics and engineering club that I've been going to...
The motivation behind this project came from a robotics and engineering club that I've been going to...

IoT Chicken Shed (Arduino, Wifi)

If you have chickens and find you're not always available to close the gate at night or check the wa...
If you have chickens and find you're not always available to close the gate at night or check the wa...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.