# Clear Piranha Super-flux RGB (tri-color) LED (25 pack) - Common Anode

**Type:** Product page · **SKU:** ADA315 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/clear-piranha-super-flux-rgb-tri-color-led-25-pack-common-anode.html ([markdown](https://core-electronics.com.au/clear-piranha-super-flux-rgb-tri-color-led-25-pack-common-anode.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: ADA302.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/ADA302

## Description

Clear 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice bright indicator or illuminator, and fun to color-swirl. 80 degree viewing angle. You can plug these into a breadboard diagonally

These are Common-Anode type which means you connect one pin to 5V or so and then tie the other three legs to ground through a resistor. We carry and use CA more than CC because multi-LED driver chips (such as the TLC5940/TLC5941) are often designed exclusively for CA and can't be used with Common-Cathode.

- 0.3"/7.6mm on each side, square. Sometimes called 'Super flux' or 'Piranha'
- Clear lens, 80 degree viewing angle
- Red: 630 nm wavelength, Green: 525 nm, Blue: 470 nm
- Red: 2.1-2.5V Forward Voltage, at 20mA current, Green: 3.8-4.5V, Blue: 3.8-4.5V
- Red: 400 mcd typical brightness, Green: 1200 mcd, Blue: 400 mcd< (2000 mcd total)
- BL-FL7680RGBC Datasheet
 
If you need some help using LEDs, please read Adafruit's "Introduction to using LEDs" tutorial for any electronics project.

## Technical Details

 ![](https://core-electronics.com.au/media/wysiwyg/resources/rohs_icon.jpg)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/3/1/315-00.jpg)