Circuit Scribe Maker Kit

SKU: COM-13255 Brand: Sparkfun

Retired Product

Replaced by: CE04717
This product has been replaced by: CE04717
This product is no longer available. This page is only for reference.

This is the Circuit Scribe Maker Kit, a massive conductive ink pack with a full range of modules and other items that you can use to create cool circuits. Similar to the Lite Kit, this Circuit Scribe Maker Kit is easy to set-up, choose the modules you want to connect, draw your circuit lines with the included Conductive Ink pen and you’re good to go! With this kit you will be able to work with more advanced output components and sensors. Add sound to your circuits using the Buzzer Module, fade between colors by combining the RGB LED and Potentiometer Modules, or control your outputs with light using the Photosensor. Of course you don’t need to just stop at using only the modules included in this kit, go out there and make any circuit you wish to create!

With Circuit Scribe you can draw exactly what you want, no wires or breadboard required. You can build a circuit with nothing but a coin battery, paper clip, and LED, or build out complex circuits with multiple components. The Conductive Ink Pen included in this kit uses a non toxic, silver conductive ink that writes on any surface a regular roller ball pen would with a resistance of 2-10 Ohms/cm. This kit also comes with a workbook full of great project ideas, 11 magnetic electric modules, a 9V battery, and a few other accessories to add to your circuits.

Includes:

  • 1x Conductive Ink Pen
  • 1x 9V Battery
  • 1x 9V Adapter Module
  • 1x NPN Transistor Module
  • 1x 2-Pin Module
  • 1x Blinker Module
  • 1x Potentiometer Module
  • 1x Photo Sensor Module
  • 1x SPST Switch Module
  • 1x Buzzer Module
  • 1x RGB LED Module
  • 2x Bi-LED Module
  • 1x Circuit Stencil
  • 1x Sheet of Jumper Stickers
  • 1x Steel Sheet
  • 1x Workbook + Sketchbook
  • 1x Mini Photo Resistor
  • 1x 100 Ohm Resistor - ¼ Watt, 5% Tolerance
  • 1x 1k Ohm Resistor - ¼ Watt, 5% Tolerance
  • 1x 10K Ohm Resistor - ¼ Watt, 5% Tolerance
  • 1x 100k Ohm Resistor - ¼ Watt, 5% Tolerance
  • 1x 1M Ohm Resistor - ¼ Watt, 5% Tolerance
  • 1x Capacitor 100nF
  • 1x Capacitor 1.0uF

Features:

  • 11 Magnetic Electric Modules
  • Guidebook with clear and defined how-to steps
  • Ink Resistance: 2-10 Ohms/cm
  • Pen Line Width: 0.4mm
  • Squeeze-Free Pen

Documents:

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Days2Bin: Pico Powered Bin Reminder

Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.