# Brass Liquid Solenoid Valve - 12V - 1/2 NPS

**Type:** Product page · **SKU:** ADA996 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/brass-liquid-solenoid-valve-12v-1-2-npt.html ([markdown](https://core-electronics.com.au/brass-liquid-solenoid-valve-12v-1-2-npt.html.md))

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There...

## Pricing

- **Price:** $78.55 (inc GST) — $71.41 AUD, exc GST
- **Quantity discounts:** 10+ $69.26 (exc GST) · 50+ $67.84 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Aug 31 and Sep 02.

## Description

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can flow. The solenoid is not polarity sensitive to polarity so there is no risk in connecting it backwards. Unlike the plastic solenoid valve, this one does not have a gasket, so there is no minimum pressure requirement.

Adafruit tried this solenoid at various DC voltages and found Adafruit could actuate it down at 6VDC (although it was a little slower to open). Here is the current draw table for various voltages. We suggest a [TIP120](https://core-electronics.com.au/tip120-power-darlington-transistors-3-pack.html) or [N-Channel power FET](https://core-electronics.com.au/n-channel-power-mosfet-30v-60a.html) with [a 1N4001 kickback diode](https://core-electronics.com.au/1n4001-diode-10-pack.html) to drive this from a microcontroller pin. For a power supply, Adafruit's [12V 5A power adapter](https://core-electronics.com.au/12v-5a-switching-power-supply-45158.html) will do the job.

[If you want smaller, more basic valve, We also carry a plastic version which does have a minimum pressure requirement but has much lower power requirements!](https://core-electronics.com.au/plastic-water-solenoid-valve-12v-1-2-nominal.html)

**Voltage Current**

6V - 1.6 A

7V - 1.86 A

8V - 2.0 A

9V - 2.3 A

10V - 2.5 A

11V - 2.7 A

12V - 3 A

These solenoids are not rated for food safety by any official standards. However, they are made of cast brass, with a rubber gasket made of NBR (Nitrile Rubber) so it can be used with any fluid that will not damage or be damaged by the rubber gasket material.

## Technical Details

- 1/2" Nominal NPS
- Working Liquid Pressure: 0 Mpa - 1.0 Mpa (140 PSI)
- Working Temperature: -5°C ~ 80°C
- Actuating voltage: 12VDC (but Adafruit found it would work down to 6V)
- Actuating life: = 50 million cycles
- Weight: 1.7lbs
- Dimensions: 105mm tall x 55mm wide x 65mm long
 
![](https://core-electronics.com.au/attachments/localcontent/rohs_icon_8216055e11.jpg)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/9/9/996-07.jpg)