# BG95 EVB Development Board Designed For QuecPython

**Type:** Product page · **SKU:** WS-27094 · **Brand:** [Waveshare](https://core-electronics.com.au/brands/waveshare-in-australia)
**Page:** https://core-electronics.com.au/bg95-evb-development-board-quecpython-lte-egprs-gnss.html ([markdown](https://core-electronics.com.au/bg95-evb-development-board-quecpython-lte-egprs-gnss.html.md))

BG95 EVB development board Designed for QuecPython, low power consumption, Supports LTE / EGPRS Communication and GNSS Positioning...

## Pricing

- **Price:** $90.70 (inc GST) — $82.45 AUD, exc GST
- **Quantity discounts:** 6+ $79.15 (exc GST) · 12+ $76.68 (exc GST)

## Availability & dispatch

- In stock, ships same business day if ordered before 2PM (Australia/Sydney).
- We can dispatch 1 today, and up to 300 more in 12–19 days.

## Restrictions

**For use in Australia**

- Operate only in bands and with settings that are permitted for your location and application. Check this product’s supported frequencies in the description/specs.
- If you intend to operate outside shared/licence‑exempt conditions (e.g. in other bands, at higher power, with high‑gain antennas, or extended duty cycles), you must have the appropriate authorisation.
 
**For use in other regions**

- Follow the spectrum rules for your country/region and select frequencies and settings accordingly.

A declaration of use will need to be submitted during checkout.

## Description

The **BG95-M3 Zero** development board is equipped with **BG95-M3** module, which is a multi-mode LPWA module supporting LTE Cat M1 / LTE Cat NB2 / EGPRS. It is 3GPP Rel-14 compliant and offers maximum data rate of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. Features ultra-low power consumption with built-in MCP as well as the ARMCortex A7 processor supporting ThreadX.

- Equipped with BG95-M3 main module, supports LTE Cat M1 / LTE Cat NB2 / EGPRS networking, applicable across global regions
- Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
- 5 LEDs for indicating module operating status
- Onboard Type-C port for easy development with just a USB Type-C cable
- Supports PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 protocols, etc.
- Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
- Onboard Nano SIM card slot, supports 1.8V SIM card, and is designed near the edge of the board for easy insertion and removal of SIM card

##  What's On Board 
![BG95 EVB development board onboard components](https://core-electronics.com.au/attachments/localcontent/BG95-M3-Zero-details-intro_310499ab1fc.jpg)

1. **BG95-M3 module**
2. **TPS63020DSJR power IC**
3. **TLV75533PDRVR power IC**
4. **NCP114AMX180TBG power IC**
5. **TXS0104EYZTR voltage level translator**
6. **Nano-SIM card slot**
7. **NET Network indicator**
8. **PSM Sleep indicator**
9. **PWM function indicator**
10. **PWR Power indicator**
11. **SIM\_CHK indicator**
    lights up when SIM card is inserted
12. **Power ON/OFF button**
13. **PSM wake-up button**
14. **BOOT button**
    Press before powering on to force firmware burning mode
15. **USB detection ON/OFF**
    Normally closed: USB can be connected normally;
    Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement
16. **Raspberry Pi GPIO Header**
    Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition
17. **Power ON/OFF jumper**
    Connect: auto turn on, short press PWK button to restart
    Disconnect: short press PWK button to power on, long press to power off
18. **1.8V output jumper**
    Connect: outputs 1.8V externally
    Disconnect: used to test power consumption
19. **Module power supply jumper**
    Connect: DCDC to power the module
20. **GNSS active power supply selection**
    Connect: enable GNSS active power supply
21. **USB Type-C port**
22. **Main antenna connector**
23. **AUX antenna connector**
24. **GNSS antenna connector**
25. **Battery power supply header**
    Supports 2.5V-5.5V battery (Note: the board cannot be powered by USB port and battery at the same time)

## Pinout

![BG95 EVB development board pinout definition](https://core-electronics.com.au/attachments/localcontent/BG95-M3-Zero-details-inter_29332bcf9e8.jpg)

## Dimensions

![BG95 EVB development board outline dimensions](https://www.waveshare.comhttps://core-electronics.com.au/attachments/localcontent/BG95-M3-Zero-details-size_1459936a84e.jpg)

## Resources

- [Wiki](https://www.waveshare.com/wiki/BG95-M3-Zero)
- [Quectel Documentation](https://python.quectel.com/doc/Getting_started/en/evb/bg95-evb.html)

## Shipping List

- 1 x BG95-M3 Zero

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/W/S/WS-27094-1.jpg)