# Assembled Adafruit Feather HUZZAH with ESP8266 WiFi With Headers

**Type:** Product page · **SKU:** ADA3046 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/assembled-adafruit-feather-huzzah-with-esp8266-wifi-with-headers.html ([markdown](https://core-electronics.com.au/assembled-adafruit-feather-huzzah-with-esp8266-wifi-with-headers.html.md))

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for...

## Pricing

- **Price:** $33.10 (inc GST) — $30.09 AUD, exc GST
- **Quantity discounts:** 10+ $29.19 (exc GST) · 50+ $28.58 (exc GST)

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable microcontroller cores.

This is the **Assembled Adafruit Feather HUZZAH ESP8266 with headers** - Adafruit's take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging and ready to go immediately! Its an ESP8266 WiFi module with all the extras you need, ready to rock! [Adafruit have other boards in the Feather family, check'em out here](https://www.adafruit.com/categories/777).

At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. Adafruit wired up a USB-Serial chip that an upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings.

To make it easy to use for portable projects, Adafruit added a connector for any of Adafruit's 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.

**Here's some handy specs!**

- Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
- Light as a (large?) feather - 9.7 grams
- ESP8266 @ 80MHz with 3.3V logic/power
- 4MB of FLASH (32 MBit)
- Built in WiFi 802.11 b/g/n
- 3.3V regulator with 500mA peak current output
- CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
- Auto-reset support for getting into bootload mode before firmware upload
- 9 x GPIO pins - can also be used as I2C and SPI
- 1 x analog inputs 1.0V max
- Built in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger
- Pin #0 red LED for general purpose blinking. Pin #2 blue LED for bootloading debug & general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button

Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua (it comes preprogrammed with the Lua interpreter). This version of the board has also been **pre-soldered**, so you can plug it right into a solderless breadboard. [Click here for the un-soldered version.](https://core-electronics.com.au/adafruit-feather-huzzah-with-esp8266-wifi.html) **Lipoly battery and USB cable not included** (but we do have lots of options in the shop if you'd like!)

[Check out Adafruit's tutorial for all sorts of details, including schematics, files, IDE instructions, power management and more!](https://learn.adafruit.com/adafruit-feather-huzzah-esp8266)

## Technical Details

- 23mm x 51mm x 18mm / 0.9" x 2" x 0.71"
- Weight: 8g

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/3/0/3046-00.jpg)