# Arduino Portemta H7 Lite Connected

**Type:** Product page · **SKU:** ABX00046 · **Brand:** [Arduino](https://core-electronics.com.au/brands/arduino-australia) · **GTIN:** 7630049202511
**Page:** https://core-electronics.com.au/arduino-portenta-h7-lite-connected.html ([markdown](https://core-electronics.com.au/arduino-portenta-h7-lite-connected.html.md))

Choose the best of two worlds: powerful, cost-effective, and ready to connect.

## Pricing

- **Price:** $179.95 (inc GST) — $163.59 AUD, exc GST

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

The Portenta H7 Lite Connected packs dual-core performance and onboard wireless into a compact Portenta module, optimised for edge AI and low-latency control where high-resolution video is not required.

Ideal for applications that need simultaneous high-level algorithms and real-time control, it supports TensorFlow Lite inference on one core while the other handles sensor, actuator or UI tasks. Typical uses include industrial controllers, robotics, machine vision (with a dedicated vision shield) and mission-critical embedded systems.

**Technical Specifications**

- Microcontroller: STM32H747XI dual-core Arm MCU (Cortex-M7 at 480 MHz + Cortex-M4 at 240 MHz)
- Compute model: Dual cores communicate via Remote Procedure Call for seamless cross-core calls; supports Arduino sketches on Mbed OS, native Mbed apps, MicroPython, JavaScript interpreter and TensorFlow Lite
- Connectivity: Ethernet (via expansion), WiFi and Bluetooth on-board
- Security: Onboard secure element - Microchip ATECC608
- Power: USB/VIN 5 V input; USB-C programming connector also supports power, host/device and OTG; USB host/device high/full speed and power delivery supported
- Battery support: Li-Po single cell, 3.7 V (minimum 700 mAh) with integrated charger
- Circuit operating voltage: 3.3 V
- Current consumption: 2.95 uA in standby (Backup SRAM OFF, RTC/LSE ON)
- Timers: 22 timers and watchdogs
- UART: 4 ports (2 with flow control)
- Ethernet PHY: 10/100 Mbps (accessible via expansion port only)
- SD card: Interface available via expansion port
- Camera interface: 8-bit parallel, up to 80 MHz (for use with Portenta Vision Shield)
- ADC: 3 ADCs, 16-bit max resolution, up to 36 channels, up to 3.6 MSPS
- DAC: 2 x 12-bit DAC (1 MHz); one DAC exposed to user via external A6 pin
- Mechanical/expansion: Two 80-pin high-density connectors for scaling and peripheral access; MKR-compatible headers to use existing MKR shields

**Additional Resources**

- [Docs](https://docs.arduino.cc/hardware/portenta-h7-lite-connected)
- [Schematic](https://content.arduino.cc/assets/PortentaH7-ABX00046-Schematics.pdf)
- [Datasheet](https://docs.arduino.cc/resources/datasheets/ABX00042-ABX00045-ABX00046-datasheet.pdf)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/A/B/ABX00046-5.jpg)