# Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor)

**Type:** Product page · **SKU:** SEN0233 · **Brand:** [DFRobot](https://core-electronics.com.au/brands/dfrobot-australia)
**Page:** https://core-electronics.com.au/air-quality-monitor-pm-2-5-formaldehyde-temperature-humidity-sensor.html ([markdown](https://core-electronics.com.au/air-quality-monitor-pm-2-5-formaldehyde-temperature-humidity-sensor.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

#### Introduction

 This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value of temperature and humidity. As the particle concentration sensor it can be used to obtain the number of suspended particles in the air by laser. It also integrates in it an electrochemical probe for formaldehyde and an one- chip sensor for temperature and humidity. The sensor can be inserted into variable instruments related to the environment parameters in the air or other environmental improvement equipments to provide correct data in time. 

 Working principle: Laser scattering principle is used for such sensor, i.e. produce scattering by using laser to radiate suspending particles in the air, then collect scattering light in a certain degree, and finally obtain the curve of scattering light change with time. In the end, equivalent particle diameter and the number of particles with different diameter per unit volume can be calculated by microprocessor based on MIE theory. Please find the functional diagram of each part of sensor from Figure 1 as follows. The function of formaldehyde detector is based on the electrochemical theory and math algorithm.

#### FEATURES

4. Zero false alarm rate
5. Real-time response
6. Correct data
7. Minimum distinguishable particle diameter :0.3 micrometer
8. High anti-interference performance because of the patent structure of six sides shielding
9. Optional direction of air inlet and outlet in order to adapt the different design
10. Concentration of Formaldehyde output
11. Temperature and Humidity output
#### Specification

13. Operating Voltage: 5.0VDC
14. Active Current: 100 mA
15. Standby Current: ≤200 uA
16. Interface Level: L <0.8V@3.3V; H> 2.7V@3.3V
17. Particle Range of measurement: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm
18. Particle Counting Efficiency: 50%@0.3μm 98%@>=0.5μm
19. Particle Effective Range (PM2.5 standard): 0 ~ 500μg/m
20. Particle Maximum Range (PM2.5 standard)\*: >0 ~ 2000ug / m³
21. Particle Resolution: 1ug / m³
22. Particle Maximum Consistency Error (PM2.5 standard data)\*: ±10%@100~500μg/m³ ±10μg/m³@0~100μg/m³
23. Particle Standard Volume: 0.1 L
24. Formaldehyde Effective Range: 0 ~ 1 mg / m³
25. Formaldehyde Maximum Range: 0 ~ 2 mg / m³
26. Formaldehyde Resolution: 0.001
27. Formaldehyde Maximum Consistency Error: <± 5%
28. Temperature Maximum Range: -20~99 ℃
29. Temperature Resolution: 0.1 ℃
30. Temperature Maximum Error: ± 0.5 ℃
31. Humidity Maximum Range: 0 ~ 99%
32. Humidity Resolution: 0.1%
33. Humidity Maximum Error: ± 2%
34. Weight: 50g
35. Default Baud rate: 9600bps
36. Total Response time: ≤ 10s
37. Operating Temperature Range: -10 ~ +60 ℃
38. Working Humidity Range: 0~99%
39. MTTF: ≥ 3 years
40. Dimension: 50 \* 38 \* 21 mm/1.97\*1.50\*0.83 inches
#### Documents

 [Product WIKI](https://www.dfrobot.com/wiki/index.php/Air_Quality_Monitor_(PM_2.5,_Formaldehyde,_Temperature_%26_Humidity_Sensor)_SKU:_SEN0233)
 [More Documents](https://www.dfrobot.com/wiki/index.php/Air_Quality_Monitor_(PM_2.5,_Formaldehyde,_Temperature_%26_Humidity_Sensor)_SKU:_SEN0233#More_Documents)

#### Parts List

44. Air Quality Monitor (PM 2.5, Formaldehyde, Temperature & Humidity Sensor) x1
45. 8-Pin Cable x1
46. PM2.5 Adapter Board x1

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/s/e/sen0233-45_e5_ba_a6900x600-900x600.jpg)