# 7.0 40-pin TFT Display - 800x480 without Touchscreen

**Type:** Product page · **SKU:** ADA2353 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/7-0-40-pin-tft-display-800x480-without-touchscreen.html ([markdown](https://core-electronics.com.au/7-0-40-pin-tft-display-800x480-without-touchscreen.html.md))

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly...

## Pricing

- **Price:** $61.40 (inc GST) — $55.82 AUD, exc GST
- **Quantity discounts:** 10+ $54.15 (exc GST) · 50+ $53.03 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Sep 01 and Sep 07.

## Description

This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability. **This version does not have touchscreen attached** [It's exactly the same TFT display as PID 2354 but without the resistive touch panel so it is a little less expensive.](https://core-electronics.com.au/7-0-40-pin-tft-display-800x480-with-touchscreen.html) This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a 125-150mA constant-current mode boost converter that can go as high as 9V instead of Adafruit's other small displays that can run the backlight off of 5V For that reason, [Adafruit are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller](https://core-electronics.com.au/ra8875-driver-board-for-40-pin-tft-touch-displays-800x480-max.html) (including Arduino & friends) [If you want to control with from an HDMI or DVI output, check out Adafruit's TFP401 driver board.](https://core-electronics.com.au/tfp401-hdmi-dvi-decoder-to-40-pin-ttl-breakout-without-touch.html) If you are an advanced electronics enthusiast [you can try wiring this directly to your processor, but it Adafruit don't have any support or tutorials for that purpose.](https://core-electronics.com.au/40-pin-tft-friend-fpc-breakout-with-led-backlight-driver.html)

## Technical Details

- Dimensions: 164mm x 100mm x 4mm / 6.5" x 3.9" x 0.2"
- [Diagram](https://core-electronics.com.au/attachments/localcontent/adafruit_products_sch_12710d1900c.png)
- [Datasheet](https://core-electronics.com.au/attachments/localcontent/KD50G21-40NT-A1_927051bd24e.pdf)

 ![](https://core-electronics.com.au/attachments/localcontent/rohs_icon_8216055e11.jpg)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/2/3/2353-00.jpg)