# 1 Wire Pi Plus

**Type:** Product page · **SKU:** CE08231 · **Brand:** [Pi Supply](https://core-electronics.com.au/brands/pi-supply-australia)
**Page:** https://core-electronics.com.au/1-wire-pi-plus-49798.html ([markdown](https://core-electronics.com.au/1-wire-pi-plus-49798.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: CE07448.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/CE07448

## Description

The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi. A 5V buffered I2C port is also provided on the board. The 1 Wire Pi Plus can be securely fitted to your Raspberry Pi using our mounting kit pack.

**Features**

- 1-Wire® to I2C host interface with ESD protection diode.
- Stackable with other Raspberry Pi accessory boards.
- Buffered 5V I2C port.
- External 5V power input for 1-Wire® interface.
- 2C address selection via solder jumpers.
 
The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port. Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB. We have a knowledge base articlefor configuring and using the 1-Wire® port on your Raspberry Pi.

The 1 Wire Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the 1 Wire Pi Plus along with other expansion boards.

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/i/m/image_3335.jpg)