It's light that you can't see, but is all around you! Infrared technology is used in thermometers, distance sensors, remote controls, and heaps more.
- PIR Infrared Motion Sensor (HC-SR501)PIR sensors often referred to as, "Passive Infrared" or "IR motion" sensors, enable you to sense motion$3.95 AUD, inc GSTDelivered by Apr 23rd
- IR Receiver Diode - TSOP38238SKU: SEN-10266 Brand: SparkfunUse this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
- IR Break Beam Sensor - 3mm LEDsInfrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a...
- PIR (motion) sensorSKU: ADA189 Brand: AdafruitPIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before...
- PIR (Motion) SensorSKU: SEN0171 Brand: DFRobotPIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.
- Adafruit MLX90640 24x32 IR Thermal Camera Breakout - 110 Degree FoVSKU: ADA4469 Brand: AdafruitYou can now add affordable heat-vision to your project and with an Adafruit MLX90640 Thermal Camera Breakout. This sensor contains a 24x32 array of IR thermal sensors...
- DIGITAL IR Transmitter Module(Arduino Compatible)SKU: DFR0095 Brand: DFRobotIR Transmitter Module is designed for IR communication when paired with IR receiver module.
- The Pi Hut Raspberry Pi 4 Camera CaseSKU: CE07177 Brand: ModMyPiThis case is perfect for combining your love for Raspberry Pi and Cameras!
- Mini Basic PIR Sensor - BL412SKU: ADA4667 Brand: AdafruitPIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained - only needs power, ground and a resistor to set the delay time - and breadboard or perfboard friendly.
- IR Break Beam Sensor - 5mm LEDsSKU: ADA2168 Brand: AdafruitInfrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a...$14.55 AUD, inc GSTAs low as $13.53 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- IR (Infrared) Receiver Sensor - TSOP38238SKU: ADA157 Brand: AdafruitIR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller. To use, connect pin 3...
- Optical Detector / Phototransistor - QRD1114SKU: SEN-00246 Brand: SparkfunThis sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
- Mini Basic PIR Sensor - BS412SKU: ADA4666 Brand: AdafruitPIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained - only needs power, ground and a resistor to set the delay time - and breadboard or perfboard friendly.
- Photo Interrupter - GP1A57HRJ00FSKU: SEN-09299 Brand: SparkfunThis sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object passes between the uprights, breaking the beam. Used for many applications including optical limit switches, pellet dispensing, general object detection, etc. Gap width = 10mm
- Pololu 38 kHz IR Proximity Sensor, Fixed Gain, Low BrightnessSKU: POLOLU-2579 Brand: PololuThis module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA and has a typical sensing range up to approximately 12 inches (30 cm).
- SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic)SKU: SEN-14607 Brand: SparkfunGet ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of...
- Pololu 38 kHz IR Proximity Sensor, Fixed Gain, High BrightnessSKU: POLOLU-2578 Brand: PololuThis module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5 V and has a typical sensing range up to approximately 24 inches (60 cm).
- Positioning IR CameraSKU: SEN0158 Brand: DFRobotEver want your robot to hunt down heat objects or navigated with fire? This is a small form factor IR camera capable of tracking up to four heat/IR sources. The applications are plenty and can go from tracking of robots with IR transmitters for navigation to light barriers, determining the direction where the object is going, and working as a flame sensor or tracking heat sources. It's fully compatible with Arduino with only four wires: two for power supply and two for I2C.
- Infrared IR Proximity Sensor for Arduino (10±5mm~80±20mm)SKU: SEN0556 Brand: DFRobotInfrared IR proximity distance sensor can detect the presence of an object within a distance of 10±5mm to 80±20mm, can be embedded in detection devices...
- Waterproof Mirror Reflection Photoelectric Sensor Switch (10~100cm)SKU: SEN0580 Brand: DFRobotThe waterproof mirror reflection photoelectric switch detects transparent objects within a distance of 10cm to 100cm and features a learning function...
- IR Break Beam Endstop SensorSKU: CE09233 Brand: Core ElectronicsAdd an easy to use end-stop sensor or filament run-out sensor to your printer/project!$4.50 AUD, inc GSTDelivered by Apr 23rd
- Infrared Line/Object Presence sensor (Adjustable digital output)SKU: CE09445 Brand: Core Electronics
Why sit around and reflect when you can use this sensor? Perfect for line or object detection.
$3.60 AUD, inc GSTDelivered by Apr 23rd - 5V IR Photoelectric Switch (4m)SKU: SEN0523 Brand: DFRobotThis IR break beam sensor works up to 4m with a fast and stable response of 0.5ms. Power the sensor by a voltage of DC 5V. It can be used with Arduino in...
- Makerverse IR Line SensorSKU: CE08493 Brand: Makerverse
Detect lines with the spare analog channels on your microcontroller!
- SparkFun PIR Breakout Starter Kit (1uA)SKU: KIT-19518 Brand: SparkfunGreat for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powered applications...
Featured Products
View All
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a ...
$2.35
View
Sometimes when you have too many choices, it’s hard to make a good decision. I ...
$7.65
View
The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to star ...
$7.45
View
This is an industrial USB to RS485 converter with original FT232RL and SP485EEN ...
$20.80
View
Makers love reviews as much as you do, please follow this link to review the products you have purchased.