empowering creative people

  1. MPU-6050 Module 3 Axis Gyroscope + Acce​​lerometer 018-MPU-6050

    MPU-6050 Module 3 Axis Gyroscope + Acce​​lerometer

    SKU: 018-MPU-6050
    A 3-axis gyroscope and 3-axis accelerometer housed on a development board ready for prototyping. Learn More
    $10.95 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $10.95 AUD

  2. Adafruit 10-DOF IMU Breakout - L3GD20H + LSM303 + BMP180 ADA1604 Adafruit Australia

    Adafruit 10-DOF IMU Breakout - L3GD20H + LSM303 + BMP180

    SKU: ADA1604
    This inertial-measurement-unit combines 3 of the best quality sensors available on the market to give you 11 axes of data: 3 axes of accelerometer data, 3 axes gyroscopic, 3 axes magnetic (compass), barometric pressure/altitude and temperature. Adafruit tested many different 'combination' sensors and found these were the best value, with stable and reliable readings. Learn More
    $44.34 AUD, inc GST
    AUD, inc GST
    $44.34 AUD
  3. Triple Axis Accelerometer and Gyro Breakout - MPU-6050 SEN-11028 Sparkfun Australia

    Triple Axis Accelerometer and Gyro Breakout - MPU-6050

    SKU: SEN-11028
    The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. Learn More
    $50.75 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $50.75 AUD

  4. 6 DOF Sensor - MPU6050 SEN0142 DFRobot Australia

    6 DOF Sensor - MPU6050

    SKU: SEN0142
    At the beginning,the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers. Learn More
    $16.12 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $16.12 AUD

  5. 3-Axis Gyro/Accelerometer IC - MPU-6050 SEN-10937 Sparkfun Australia

    3-Axis Gyro/Accelerometer IC - MPU-6050

    SKU: SEN-10937
    The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. The parts’ integrated 9-axis MotionFusion algorithms can even access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor. Learn More
    $23.55 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $23.55 AUD

  6. OBDII TTL UART Adapter TEL0066 DFRobot Australia

    OBDII TTL UART Adapter

    SKU: TEL0066
    The Arduino OBD-II Kit consists of an OBD-II UART adapter which provides an OBD-II to UART data bridge, and a dedicated library for Arduino. The adapter outputs realtime vehicle data retrieved from OBD-II port as well as regulated power supply sufficent for Arduino Learn More
    $100.42 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $100.42 AUD

  7. L3GD20H 3-Axis Gyro Carrier with Voltage Regulator POLOLU-2129 Pololu Australia

    L3GD20H 3-Axis Gyro Carrier with Voltage Regulator

    SKU: POLOLU-2129
    This sensor is a carrier/breakout board for the ST L3GD20H three-axis gyroscope, which measures the angular rates of rotation about the roll (X), pitch (Y), and yaw (Z) axes. Angular velocity measurements with a configurable range of ±245°/s, ±500°/s, or ±2000°/s can be read through a digital I²C or SPI interface. The board has a 3.3 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.5 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards. Learn More
    $11.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $11.26 AUD

  8. 10 DOF Mems IMU Sensor SEN0140 DFRobot Australia

    10 DOF Mems IMU Sensor

    SKU: SEN0140
    At the beginning,the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers. Learn More
    $64.22 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $64.22 AUD

  9. FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0 - v1.0 ADA2020 Adafruit Australia

    FLORA 9-DOF Accelerometer/Gyroscope/Magnetometer - LSM9DS0 - v1.0

    SKU: ADA2020
    Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself. Learn More
    $30.01 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $30.01 AUD

  10. Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0 ADA2021 Adafruit Australia

    Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0

    SKU: ADA2021
    Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself. Learn More
    $37.53 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $37.53 AUD

Set Ascending Direction

10 Item(s)