empowering creative people

  1. Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3 (ADA1438) Image 1 ADA1438 Adafruit Australia

    Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.0

    SKU: ADA1438
    The original Adafruit Motorshield kit is one of Adafruit's most beloved kits, which is why Adafruit decided to make something even better. Adafruit have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. Learn More
    $30.08 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $30.08 AUD

  2. Raspberry Pi Camera Mount CE04431 Pimoroni Australia

    Raspberry Pi Camera Mount

    SKU: CE04431
    A stylish, small, and adjustable mount for your Pi Camera. Learn More
    $6.95 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $6.95 AUD

  3. DC Toy / Hobby Motor - 130 Size (ADA711) Image 1 ADA711 Adafruit Australia

    DC Toy / Hobby Motor - 130 Size

    SKU: ADA711
    These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. Learn More
    $2.90 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $2.90 AUD

  4. FEETECH FS90R Micro Continuous Rotation Servo POLOLU-2820 Pololu Australia

    FEETECH FS90R Micro Continuous Rotation Servo

    SKU: POLOLU-2820
    The FS90R is a micro servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation, offering an inexpensive and easy way to get your miniature robot moving or small turret spinning. Key specs at 6 V: 130 RPM (no-load), 21 oz-in (1.5 kg-cm), 9 g Learn More
    $9.17 AUD, inc GST
    AUD, inc GST
    delivered by
    Wed 14th of Dec

    $9.17 AUD

  5. Plastic Water Solenoid Valve - 12V - 1/2 inch Nominal (ADA997) Image 1 ADA997 Adafruit Australia

    Plastic Water Solenoid Valve - 12V - 1/2" Nominal

    SKU: ADA997
    Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can push through. The valve has a gasket arrangement inside, so there is a minimum pressure requirement of 0.02 Mpa (3 PSI). Also, liquid can only flow one direction. Learn More
    $10.53 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $10.53 AUD

  6. Vibrating Mini Motor Disc (ADA1201) Image 1 ADA1201 Adafruit Australia

    Vibrating Mini Motor Disc

    SKU: ADA1201
    *BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed. Learn More
    $2.90 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $2.90 AUD

  7. Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V POLOLU-2598 Pololu Australia

    Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    SKU: POLOLU-2598
    Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. Learn More
    $11.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $11.26 AUD

  8. Stepper motor - NEMA-17 size - 200 steps/rev 12V 350mA (ADA324) Image 1 ADA324 Adafruit Australia

    Stepper motor - 200 steps/rev, 12V 350mA

    SKU: ADA324
    A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery. Learn More
    $20.72 AUD, inc GST
    AUD, inc GST
    $20.72 AUD
  9. DRV8825 Stepper Motor Driver Carrier, High Current POLOLU-2133 Pololu Australia

    DRV8825 Stepper Motor Driver Carrier, High Current

    SKU: POLOLU-2133
    This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of Pololu's A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in. Learn More
    $12.04 AUD, inc GST
    AUD, inc GST
    delivered by
    Wed 14th of Dec

    $12.04 AUD

  10. 10 sets M3 * 20 nylon standoffs FIT0182 DFRobot Australia

    10 sets M3 * 20 nylon standoffs

    SKU: FIT0182
    Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. Learn More
    $3.35 AUD, inc GST
    AUD, inc GST
    $3.35 AUD

Set Ascending Direction

1-10 of 294

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5