empowering creative people

  1. 9V battery holder with switch & 5.5mm/2.1mm plug (ADA67) Image 1 ADA67 Adafruit Australia

    9V battery holder with switch & 5.5mm/2.1mm plug

    SKU: ADA67
    This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm barrel plug. Use this to battery-power your Arduino (or other electronic projects) - it's ready to go out of the box! Learn More
    $6.02 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $6.02 AUD

  2. Coin Cell Battery Holder - 20mm (Sewable) DEV-08822 Sparkfun Australia

    Coin Cell Battery Holder - 20mm (Sewable)

    SKU: DEV-08822
    This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification. Learn More
    $2.16 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $2.16 AUD

  3. Battery Holder - 1x18650 (wire leads) PRT-12899 Sparkfun Australia

    Battery Holder - 1x18650 (wire leads)

    SKU: PRT-12899
    This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it. Learn More
    $1.69 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $1.69 AUD

  4. 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST (ADA727) Image 1 ADA727 Adafruit Australia

    3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

    SKU: ADA727

    This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of Adafruit's Li-Ion/Poly batteries.

    Learn More
    $2.90 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $2.90 AUD

  5. 8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch (ADA875) Image 1 ADA875 Adafruit Australia

    8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch

    SKU: ADA875
    Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one is good for running electronics that have a 5V voltage regulator (thus requiring a 7V+ supply) or perhaps some motors or solenoids. Learn More
    $9.02 AUD, inc GST
    AUD, inc GST
    $9.02 AUD
  6. 9V battery clip with 5.5mm/2.1mm plug (ADA80) Image 1 ADA80 Adafruit Australia

    9V battery clip with 5.5mm/2.1mm plug

    SKU: ADA80
    I found these high-quality battery clips. They're molded plastic so they wont tear like cheap clips, and they cover the battery terminals to prevent shorts. Learn More
    $4.51 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $4.51 AUD

  7. AA Battery Holder 003-1XAAHOLDER

    AA Battery Holder

    SKU: 003-1XAAHOLDER
    One x AA Battery Holder with wire connectors. Learn More
    $0.75 AUD, inc GST
    AUD, inc GST
  8. 9V Battery Holder PRT-10512 Sparkfun Australia

    9V Battery Holder

    SKU: PRT-10512
    This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure. Learn More
    $4.77 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $4.77 AUD

  9. 3-AAA Battery Holder POLOLU-1144 Pololu Australia

    3-AAA Battery Holder

    SKU: POLOLU-1144
    Battery holder for three AAA cells. Learn More
    $1.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 6th of Dec

    $1.26 AUD

  10. Battery Holder - 2x18650 (wire leads) PRT-12900 Sparkfun Australia

    Battery Holder - 2x18650 (wire leads)

    SKU: PRT-12900
    This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it. Learn More
    $2.40 AUD, inc GST
    AUD, inc GST
    delivered by
    Fri 9th of Dec

    $2.40 AUD

Set Ascending Direction

1-10 of 45

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5