empowering creative people

  1. Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface - TLC5947 (ADA1429) Image 1 ADA1429 Adafruit Australia

    Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface - TLC5947

    SKU: ADA1429
    For all of you out there who want to control 24 channels of PWM, Adafruit salute you! They also would like you to check out this breakout board for the TLC5947 PWM driver .. read more Learn More
    $25.00 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 23rd of Jan

    $25.00 AUD

  2. FemtoBuck LED Driver COM-13716 Sparkfun Australia

    FemtoBuck LED Driver

    SKU: COM-13716
    This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is based off of the PicoBuck LED Driver, developed in collaboration with Ethan Zonca, except instead of blending three different LEDs on three different channels the FemtoBuck controls just one. Learn More
    $12.15 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $12.15 AUD

  3. Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 (ADA815) Image 1 ADA815 Adafruit Australia

    Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

    SKU: ADA815
    You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise .. read more Learn More
    $25.00 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $25.00 AUD

  4. Adafruit 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711 (ADA1455) Image 1 ADA1455 Adafruit Australia

    Adafruit 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711

    SKU: ADA1455
    For all of you out there who want to control 12 channels of PWM, Adafruit salute you! They also would like you to check out this breakout board for the TLC59711 PWM driver .. read more Learn More
    $12.95 AUD, inc GST
    AUD, inc GST
    $12.95 AUD
  5. PicoBuck LED Driver COM-11850 Sparkfun Australia

    PicoBuck LED Driver

    SKU: COM-11850
    The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. Power in supplied to the PicoBuck with a wide range of input voltages (6v to 20v) connected to the VIN header and three inputs for each driver channel (labeled IN1, IN2, and IN3) driven with standard 3.3v or 5v logic. Learn More
    $19.03 AUD, inc GST
    AUD, inc GST
    $19.03 AUD
  6. ShiftBar COM-10238 Sparkfun Australia

    ShiftBar

    SKU: COM-10238
    The ShiftBar is a medium-power RGB LED controller, capable of powering three channels of LEDs from 10mA to 150mA and from 5V to 17V. It’s ideal for many common-anode RGB LED bars, such as the Satellite Module 001. It uses the same A6281 controller as the ShiftBrite, with daisy-chainable SPI communication that is simple to use with any microcontroller. Each channel is controlled with its own 10-bit PWM register and 7-bit current control register. A trim potentiometer allows the user to adjust overall current limiting to any desired maximum. Learn More
    $16.19 AUD, inc GST
    AUD, inc GST
    $16.19 AUD
  7. 6x1 F-F 24" Cable for ShiftBrites and ShiftBars POLOLU-1237 Pololu Australia

    6x1 F-F 24" Cable for ShiftBrites and ShiftBars

    SKU: POLOLU-1237
    These 24" (60 cm), six-conductor cables can be used to chain together ShiftBrite or ShiftBar modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is composed of stranded 26 AWG wires and has female 0.1" 6×1 connectors on both ends. Learn More
    $2.98 AUD, inc GST
    AUD, inc GST
    $2.98 AUD
  8. 6x1 F-F 6" Cable for ShiftBrites and ShiftBars POLOLU-1238 Pololu Australia

    6x1 F-F 6" Cable for ShiftBrites and ShiftBars

    SKU: POLOLU-1238
    These 6" (15 cm), six-conductor cables can be used to chain together ShiftBrite or ShiftBar modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is composed of stranded 26 AWG wires and has female 0.1" 6×1 connectors on both ends. Learn More
    $2.11 AUD, inc GST
    AUD, inc GST
    $2.11 AUD
  9. FadeCandy NeoPixel Driver - USB-Controlled Dithering COM-12821 Sparkfun Australia

    FadeCandy NeoPixel Driver - USB-Controlled Dithering

    SKU: COM-12821
    This is the FadeCandy from Adafruit, a USB controlled LED driver with on-board dithering to help illuminate your Neopixel project. Even though the FadeCandy was designed to be used alongside of the NeoPixel Line the driver also works with most WS2811/12 LEDs. This little board has been designed to help both beginners and the advanced LED techie! Learn More
    $45.34 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 23rd of Jan

    $45.34 AUD

  10. OctoBrite DEFILIPPI POLOLU-1244 Pololu Australia

    OctoBrite DEFILIPPI

    SKU: POLOLU-1244
    This is a medium-power LED controller for up to 24 independent channels of LEDs (or 8 RGB LEDs), featuring 12-bit digital brightness control with up to 20 mA per channel. The board is based on the Texas Instruments TLC5947, which supports voltages of up to 30 V, so each channel can be connected to a chain of several LEDs for bright displays (up to 14 W total LED power). Multiple OctoBrite modules can be chained together to create large LED displays. Learn More
    $42.09 AUD, inc GST
    AUD, inc GST
    $42.09 AUD

Set Ascending Direction

1-10 of 11

Page:
  1. 1
  2. 2