empowering creative people

  1. Beginner Kit For Arduino DFR0100 DFRobot Australia

    Beginner Kit For Arduino

    SKU: DFR0100
    This Arduino beginner kit is designed for everyone that is new to and/or interested in learning about Arduino. You'll get a basic introduction to the Arduino world and a range of products which can be used for a huge range of projects. Tutorials are prewritten and available online, they start from basic LED control to more advanced IR remote control. If you are new to microcontrollers and physical computing then this kit is for you! Learn More
    $74.95 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $74.95 AUD

  2. LCD Keypad Shield For Arduino DFR0009 DFRobot Australia

    LCD Keypad Shield For Arduino

    SKU: DFR0009
    This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display. Learn More
    $16.12 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $16.12 AUD

  3. Soil Moisture Sensor (Arduino Compatible) Immersion Gold SEN0114 DFRobot Australia

    Soil Moisture Sensor (Arduino Compatible) Immersion Gold

    SKU: SEN0114
    The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation. Electroless nickel immersion gold (ENIG) has several advantages over more conventional (and cheaper) surface platings such as HASL (solder), including excellent surface planarity (particularly helpful for PCB's with large BGA packages), good oxidation resistance, and usability for untreated contact surfaces such as membrane switches and contact points. Learn More
    $7.93 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 24th of Jan

    $7.93 AUD

  4. Xbee Shield For Arduino DFR0015 DFRobot Australia

    Xbee Shield For Arduino

    SKU: DFR0015
    The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. As the innovative design, XBee-PRO can be in the range 2-3 times beyond the standard ZigBee modules. XBee-PRO modules work in the ISM 2.4 GHz frequency band. The MaxStream's XBee (1 mW) Zigbee module is pin-compatible. Learn More
    $13.39 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $13.39 AUD

  5. FTDI Basic Breakout 3.3/5V (Arduino Compatible) DFR0065 DFRobot Australia

    FTDI Basic Breakout 3.3/5V (Arduino Compatible)

    SKU: DFR0065
    This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. Learn More
    $21.07 AUD, inc GST
    AUD, inc GST
    $21.07 AUD
  6. Proto Screw Shield-Assembled (Arduino Compatible) DFR0131 DFRobot Australia

    Proto Screw Shield-Assembled (Arduino Compatible)

    SKU: DFR0131
    Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield. Learn More
    $16.12 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 24th of Jan

    $16.12 AUD

  7. Xbee USB adapter DFR0050 DFRobot Australia

    Xbee USB adapter

    SKU: DFR0050
    The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter. Learn More
    $29.75 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 24th of Jan

    $29.75 AUD

  8. IIC LCD1602 (Gadgeteer Compatible) DFR0063 DFRobot Australia

    IIC LCD1602 (Gadgeteer Compatible)

    SKU: DFR0063
    This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The adress can be set from 0x20-0x27.Fantastic for Arduino or gadgeteer based projects. Learn More
    $16.12 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $16.12 AUD

  9. Digital Infrared Motion Sensor SEN0018 DFRobot Australia

    Digital Infrared Motion Sensor

    SKU: SEN0018
    This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. Learn More
    $8.93 AUD, inc GST
    AUD, inc GST
    delivered by
    Tue 24th of Jan

    $8.93 AUD

  10. 2A Motor Shield For Arduino DRI0009 DFRobot Australia

    2A Motor Shield For Arduino

    SKU: DRI0009
    This DFRobot Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand Arduino Mega. Learn More
    $24.79 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 19th of Jan

    $24.79 AUD

Set Ascending Direction

1-10 of 37

Page:
  1. 1
  2. 2
  3. 3
  4. 4