empowering creative people

  1. USB Audio Adapter - Works with Raspberry Pi (ADA1475) Image 1 ADA1475 Adafruit Australia

    USB Audio Adapter - Works with Raspberry Pi

    SKU: ADA1475
    The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! Learn More
    $7.52 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $7.52 AUD

  2. Mono 2.5W Class D Audio Amplifier - PAM8302 ADA2130 Adafruit Australia

    Mono 2.5W Class D Audio Amplifier - PAM8302

    SKU: ADA2130
    This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but Adafruit could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic "LM386" amps! Learn More
    $5.95 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $5.95 AUD

  3. Electret Microphone Amplifier - MAX4466 with Adjustable Gain (ADA1063) Image 1 ADA1063 Adafruit Australia

    Electret Microphone Amplifier - MAX4466 with Adjustable Gain

    SKU: ADA1063
    Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, Adafruit uses the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts Adafruit have tried! Learn More
    $10.53 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $10.53 AUD

  4. Stereo 20W Class D Audio Amplifier - MAX9744 (ADA1752) Image 1 ADA1752 Adafruit Australia

    Stereo 20W Class D Audio Amplifier - MAX9744

    SKU: ADA1752
    Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease. Since it's class D, its completely cool-running, no heat sinks are required and it's extremely efficient - up to 93% efficiency makes it great for portable or battery powered rigs. Learn More
    $30.08 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $30.08 AUD

  5. Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash ADA2220 Adafruit Australia

    Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    SKU: ADA2220
    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be small and portable? You are probably feeling a little frustrated: it's been very hard to find a simple, low cost audio effects trigger that is easy to use and does not require any programming Learn More
    $36.94 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $36.94 AUD

  6. Graphic Equalizer Display Filter - MSGEQ7 COM-10468 Sparkfun Australia

    Graphic Equalizer Display Filter - MSGEQ7

    SKU: COM-10468
    The seven band graphic equalizer IC is a CMOS chip that divides the audio spectrum into seven bands. 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. The seven frequencies are peak detected and multiplexed to the output to provide a DC representation of the amplitude of each band. No external components are needed to select the filter responses. Only an off chip resistor and capacitor are needed to select the on chip clock oscillator frequency. The filter center frequencies track this frequency. Learn More
    $8.14 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $8.14 AUD

  7. Teensy Audio Board DEV-12767 Sparkfun Australia

    Teensy Audio Board

    SKU: DEV-12767
    This is the Teensy Audio board add-on for the Teensy 3.0 and 3.1 development boards. This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy project. With the audio library provided in the Documents section below you will be able to use both the input and output simultaneously in order to make a variety of great audio projects, incorporate synth waveforms, effects, and mix multiple sound streams and cd quality audio to your headphones or different line outs! Learn More
    $29.97 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $29.97 AUD

  8. Speaker - PCB Mount COM-11089 Sparkfun Australia

    Speaker - PCB Mount

    SKU: COM-11089
    This through-hole speaker is great for projects where you need something that sounds better than a piezo buzzer but don’t have room for a full-blown speaker. This 30mm diameter speaker is encased in plastic and will handle about 100mW of power. Learn More
    $3.07 AUD, inc GST
    AUD, inc GST
    $3.07 AUD
  9. Stereo 3.7W Class D Audio Amplifier - MAX98306 (ADA987) Image 1 ADA987 Adafruit Australia

    Stereo 3.7W Class D Audio Amplifier - MAX98306

    SKU: ADA987
    This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving an 8Ω speaker at over a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but Adafruit could barely tell it got hot. This board is a welcome upgrade to basic "LM386" amps! Learn More
    $13.53 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $13.53 AUD

  10. 3W mini audio stereo amplifier DFR0119 DFRobot Australia

    3W mini audio stereo amplifier

    SKU: DFR0119
    This is a mini stereo amplifier. It is a fully functional, two-channel audio amplifier, comes with electric switcher. Learn More
    $7.40 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 19th of Dec

    $7.40 AUD

  11. Thin Speaker COM-10722 Sparkfun Australia

    Thin Speaker

    SKU: COM-10722
    If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in one of those “talking greeting cards”. Learn More
    $1.33 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $1.33 AUD

  12. Piezo Speaker - PC Mount 12mm 2.048kHz COM-07950 Sparkfun Australia

    Piezo Speaker - PC Mount 12mm 2.048kHz

    SKU: COM-07950
    This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. Learn More
    $2.02 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $2.02 AUD

  13. SparkFun MP3 Player Shield DEV-12660 Sparkfun Australia

    SparkFun MP3 Player Shield

    SKU: DEV-12660
    The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis. Learn More
    $43.18 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $43.18 AUD

  14. Sound Detector SEN-12642 Sparkfun Australia

    Sound Detector

    SKU: SEN-12642
    The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once. Learn More
    $16.58 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 15th of Dec

    $16.58 AUD

  15. WAV Trigger WIG-13660 Sparkfun Australia

    WAV Trigger

    SKU: WIG-13660
    The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI. Learn More
    $75.94 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 15th of Dec

    $75.94 AUD

  16. Digital Buzzer Module DFR0032 DFRobot Australia

    Digital Buzzer Module

    SKU: DFR0032
    Buzz! Buzz! The buzzer module makes sound for your project. Learn More
    $4.96 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $4.96 AUD

  17. Music Instrument Shield DEV-10587 Sparkfun Australia

    Music Instrument Shield

    SKU: DEV-10587
    Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8" stereo jack on the shied and pass the proper serial commands to the IC and you’ll be playing music in no time! Learn More
    $48.02 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 15th of Dec

    $48.02 AUD

  18. Electret Microphone - 20Hz-20KHz Omnidirectional (ADA1064) Image 1 ADA1064 Adafruit Australia

    Electret Microphone - 20Hz-20KHz Omidirectional

    SKU: ADA1064
    This electret capsule microphone is the same one Adafruit uses in Adafruit's great microphone amplifier board. It contains a small vibrating element that will output a few milllivolts peak-to-peak. You will need an op-amp to amplify the signal, some chips are designed with the amplifier built in in which case you can wire it up directly. Learn More
    $1.40 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $1.40 AUD

  19. Surface Transducer - Large COM-10975 Sparkfun Australia

    Surface Transducer - Large

    SKU: COM-10975
    Surface transducers give you the awesome power to turn almost any surface into a speaker. They’re essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook it up to an audio source and press it against the nearest table, wall or cardboard box. You can even put it against your head and play music directly into your skull (the ultimate surround sound). Learn More
    $33.78 AUD, inc GST
    AUD, inc GST
    delivered by
    Thu 15th of Dec

    $33.78 AUD

  20. Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016 (ADA1712) Image 1 ADA1712 Adafruit Australia

    Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016

    SKU: ADA1712
    A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting. Learn More
    $15.04 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 12th of Dec

    $15.04 AUD

Set Ascending Direction

1-20 of 74

Page:
  1. 1
  2. 2
  3. 3
  4. 4